Flir lepton breakout board upgrade#
Flir lepton breakout board full#
Flir lepton breakout board android#
Flir lepton breakout board software#

When inserting it into the breakout board be sure to use proper personal grounding, such as a grounding wrist strap, to prevent damage the module. The Lepton® module is extremely sensitive to electrostatic discharge (ESD). **Note:** This kit comes in two separate parts and will need to be assembled once received. A few things to consider about this kit: the breakout board will accept a 3-5V input and regulate it to what the Lepton® wants, to read an image from the lepton module all you need is an SPI port, and to configure the camera settings you also need an I 2C port, although this is not required. Meanwhile, each breakout board in these kits provides the socket for the Lepton®, power supply's, 25Mhz Crystal Oscillator, 100 mil header for use in a breadboard or wiring to any host system. The Lepton® LWIR module included in each FLiR Dev Kit acts as a sort of camera and packs a resolution of 80 × 60 pixels into a camera body that is smaller than a dime and captures infrared radiation input in its nominal response wavelength band (from 8 to 14 microns) and outputs a uniform thermal image.

Flir lepton breakout board full#

All you need to do to get this kit set up, simply attach the Lepton® imager module into the provided breakout, connect the headers, and you will be seeing in full darkness in no time! With this kit you will be able to bring FLiR's thermal imaging reliability and power to your Arduino, Raspberry Pi, or any ARM based development tool all in an easy to access breadboard friendly package. Stock is being refilled, in the meantime you can get the camera and breakout here: What is it This is a Breakout board for the Lepton.

Compatible with all current 2.x and 3.The FLiR Dev Kit includes a breakout as well as a Lepton® longwave infrared (LWIR) imager.

UART, I 2C, and GPIO Expansion via standard 0.1” holes.

Debug via JTAG through a 6-Pin plug-of-Nails port using a Tag-Connect TC2030-IDC-NL, an ARM20-CTX, & ST-Link V/2.

It provides on-board power supplies, generated from 3 5.5V, and a master clock. In addition it is easy to wire to any nonstandard pin outs as well such as the raspberry PI. The FLIR Lepton Thermal Camera Breakout Board is an easy-to-interface evaluation board to quickly connect all versions of the FLIR Lepton camera module to common platforms like Raspberry Pi or custom hardware such as mobile development kits. It is compatible with a number of low-cost ARM based evaluation boards such as the NUCLEO-F401RE.

Flir lepton breakout board upgrade#

Device Firmware Upgrade (DFU) the STM32 ARM MCU over USB The FLIR Lepton® Thermal Camera Breakout is an easy to interface to evaluation board to quickly evaluate the FLIR Lepton® Camera module.Through-holes for GPIO and peripheral breakouts to easily attach other devices.Execute on-board image processing without the need for an external system PT2 can do 9 Hz color video over usb using the USB UVC class.

Flir lepton breakout board android#

Get Thermal video over USB right out of the box using freeware apps like VLC on Mac, Linux, Windows, or Android.

The Lepton module is extremely sensitive to electrostatic discharge (ESD). Note: The PureThermal 2 does NOT include a FLIR Lepton imaging module and will need to be purchased separately or in the Dev Kit. The PureThermal 2 and GetThermal both support the radiometric mode of Lepton 2.5 & 3.5 and can view Lepton data on x86 Linux and macOS platforms or even on a Raspberry Pi.

It provides onboard power supplies, generated from 3 5.5V, and a master clock.

Flir lepton breakout board software#

It's easy to get started with the PureThermal 2 with the open source software application, GetThermal. The FLIR Lepton® Thermal Camera Breakout Board is an easy-to-interface evaluation board to quickly connect the FLIR Lepton camera module to common platforms like RaspberryPi or custom hardware. If USB isn't necessarily your desired medium, this board has also been fitted with 0.1' pins to interface over UART or I 2C.

With a Lepton inserted into the PureThermal 2 you will be able to achieve 9Hz color video over USB using the USB UVC class. For developers, its reference firmware, viewer software, and hardware schematic are all open source!Įach PureThermal 2 is equipped with the reliable STM32F412 ARM microprocessor capable of processing images without any external system inputs. Each PureThermal 2 ships pre-configured to operate as a plug-and-play UVC 1.0 USB thermal webcam that will work with a standard webcam and video apps on all major platforms. The PureThermal 2 Smart I/O Board is a hackable thermal USB webcam breakout for the FLIR Lepton® thermal imaging camera core.